Menu

Archive

Flow Test

Fuel Lock devices are equipped with an on-board install/troubleshooting menu designed to assist installers and electricians with initial install and calibration of the device, as well as field troubleshooting if hardware fails during operation. For information on how to do a Flow Test, check out this video. Notes: This tool does not require any Fuel Lock […]

No Pulses/Flow Being Detected or Device Constantly Detecting Pulses

Symptoms Pulser board not reading Unauthorized pulses Liters/pulses not being tracked Not detecting flow on single slot Fuel Lock device (screen) not showing liters Possible Causes Faulty flow meter board Disconnected J16 J16 connector not connected properly / the right way On the main board, slots wired to the top connector instead of the bottom […]